logo2..gif (4337 bytes)


 Metal Fabrication and Tool & Die
 ISO/TS 16949: 2002 /
 IS09001:2000 Registered
 11160 State Highway #18
 Conneaut Lake, PA 16316
 (814) 382-8691

PRODUCTION

Home Contents

 
VIKING TOOL AND GAGE, INC'S PRODUCTION DEPARTMENT EQUIPMENT

MILLS


(1) JOHNSFORD SV-45 VERTICAL MACHINING CENTER 15 HP, 8000 RPM X=45" Y=21" Z=25" POSITIONAL ACCURACY +/-.0002" W/ INDEXER
(1) MORI SEIKI PARTNER W/PALLET CHANGER X=15.75" Y=11.8" Z=19.5"
(1) CINCINNATI 10 HP HORIZONTAL MILL
(2) CHIRON FZ08W MACHINING CENTERS, 15,000RPM SPINDLE SPEED X=12" Y=10" Z=10"
(1) CHIRON FZ12W MACHINING CENTER, 15,000RPM SPINDLE SPEED X=21" Y=12" Z=16"
(1) K & T PRODUCTION STANDARD ANALYST MILL 18" X 48"
(1) HAAS MODEL EC-400 HORIZONTAL MACHINING CENTER, 12,000 RPM SPINDLE SPEED, X=20", Y=20" ,Z=20"
 (1) HAAS MODEL GR-512 VERTICAL GANTRY MACHINING CENTER, 15,000 RPM 40 TAPER SPINDLE X 145", Y-61", Z=17"
 (1) HAAS MODEL GR 510 VERTICAL GANTRY MACHINING CENTER, 5,000 RPM 40 TAPER SPINDLE X=121", Y=61", Z=11"
 (1) MORI SEIKI NH-4000/40 HORIZONTAL MACHINING CENTER WITH THROUGH THE SPINDLE COOLANT
 (1) MORI SEIKI MODEL NH-5000A/40 HORIZONTAL MACHINING CENTER WITH CHIPBLASTER, 30 HP, 14,000 RPMs, X=24.8" Y=23.6" Z=26.4"
(1) MORI SEIKI MODEL NH-4000/40 HORIZONTAL MACHINING CENTER WITH THROUGH THE SPINDLE COOLANT, X=22", Y=22", Z=24.8"
 (1) HAAS MODEL VF-3YT/50 VERTICAL MACHINING CENTER WITH THROUGH THE SPINDLE COOLANT, X=40", Y=26", Z=25"
 (1) MORI SEIKI MODEL SH-403 HORIZONTAL MACHINING CENTER WITH CHIPBLASTER. X=22" Y=20"Z=20"
(1) HAAS VF-4SS SUPER SPEED MACHINING CENTER WITH THROUGH THE SPINDLE COOLANT, X=50", Y=20", Z=25"
(1) NO.3 CINCINNATI PLAIN VERTICAL MILL 15HP 15"x62" TABLE WITH POWER ROTARY TABLE



LATHES

(1) MAZAK QUICKTURN 10 CNC
(1) MAZAK QUICKTURN 20 CNC
(1) *MORI SEIKI MODEL SL3 LATHE
(1) MORI SEIKI MODEL NL2000Y/500 TURNING CENTER 5,000 RPM SPINDLE, X = 121", Y = 61" Z = 11" WITH CNC BAR FEEDER

* INDICATES PURCHASED IN 2006

PRESSES

(20) AIR, HYDRAULIC, AND MECHANICAL PRESSES RANGING IN CAPACITY FROM 1 TON TO 175 TONS (UP TO 14' IN LENGTH)
(3) COIL FEEDERS
(11) DRILL PRESSES

SAWS
(1) THOMAS SAW FOR NON-FERROUS METAL W/ AUTO FEED & MITRE ABILITY (5" SQ X 20')
(1) B & O CUT-OFF SAW FOR NON-FERROUS METAL W/ AUTO FEED (8" X 18')
(1) METLSAW CUT-OFF SAW FOR NON-FERROUS METAL W/ AUTO FEED (24" X 4" X 20' CAPACITY)
(1) B & O CUT-OFF SAW WITH DROP ARBOR FOR NON-FERROUS METAL W/ AUTO FEED (25" X 8" X 18' CAPACITY)
(1) ELUMATEC 2-HEAD COMPOUND MITRE SAW FOR NON-FERROUS METAL (CAPACITY 6" X 6" X 15')
(1) TSUNE TK5M-90PL AUTOMATIC, NON FERROUS SAW W/AUTO FEED

FINISHING

(1) VIBRATORY DEBURR MACHINES (5 CU FT)
(2) PARTS TUMBLER, WITH STEEL MEDIA CAPABILITY. (5 CU FT)
(1) ROTO-FINISH 18 CUBIC FEET SPIRATRON VIBRATORY DEBURR MACHINE
(1) SWECO VIBRATORY TUMPLER (10 CU.FT.)
(3) BRUSH DEBURR MACHINES
(1) MAGNUS WASHERS (CAPACITY TO 30" X 50" X 36")
(6) BRUSH DEBURRS
(1) MIRACLEAN ULTRASONIC PARTS CLEANER

INSPECTION EQUIPMENT


(1)*MITUTOYO MODEL CRYSTA PLUS C574 COMPUTER ASSISTED COORDINATE MEASURING MACHINE
(1) COMPUTER ASSISTED COORDINATE MEASURING MACHINES
(2) OPTICAL COMPARATORS: 10 TO 1 20 TO 1 31¼ TO 1 62½ TO 1 MAGNIFICATION AVAILABLE
(1) WILSON ROCKWELL HARDNESS TESTER (B & C SCALE)
(1) RAM OMIS III 12" x 12" x 8" OPTICAL CMM WITH CAD INTERFACE, DES, AND PENTIUM 75 COMPUTER
(1) FEDERAL SURFACE FINISH TESTER
(2) MITUTOYO 60" ELECTRONIC CALIPER VARIOUS HAND MEASURING TOOLS INCLUDING 6", 8", 12", 18" AND 24" ELECTRONIC AND DIAL CALIPERS, MICROMETERS, DIGITAL PROTRACTORS AND INDICATORS, CERAMIC AND STEEL GAGE BLOCK SETS (.004" - 48.000"), THREAD GAGES, AND GAGE PINS RANGING IN SIZE FROM .011" TO 1.000"
(1) NEWALL DIGITAL LENGTH MEASURING GAGE 0-120" RANGE ACCURACY +/- .0005"


ALL MACHINERY AND EQUIPMENT FULLY TOOLED AND IN EXCELLENT CONDITION

Top of page

Go Home

Contacts

 

Send mail to viking@vikingtg.com with questions or comments about this web site.
Copyright © 2003 Viking Tool & Gage, Inc.